Guide Sleeve - Without Cleat - With Lip - 3.1 mm x 5 mm Drills drills have the responsibility to

drills have the responsibility to determine whether the diameter and length of these products are suitable for the particular surgical procedure

5 mm Guide Sleeve

0 mm for 4

035” Hex Driver is used to tighten and loosen the Stylus Set Screw against one of the four flat sides of the Guide Post

Guide Sleeve - Without Cleat - With Lip - 3.1 mm x 5 mm Drills drills have the responsibility toThe 3. 1 mm Guide Sleeve Without Cleat With Lip is designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole. For use with printed guides only. Dimensions: ID 3. 06 mm at apex top x OD 3. 75 mm x 5. 04 mm L OD 4. 5 mm lip x . 05 mm lip thickness Pair with: 3. 0 mm Lindemann Depth Stop Drill Set