Straight Guide Sleeve - Without Cleat - 2.0 mm x 6.0 mm Guide Sleeve Inserts Thin-Walled Diagnostic Guide Sleeve -

Thin-Walled Diagnostic Guide Sleeve - With Cleat - 2

then cured to form the Guide

in order to prevent rotating during the bend

It is recommended (not always necessary) to use the Flattening Drill prior to the Pilot Drill if the crest is sharp or slanted and start the dental implant osteotomy site preparation with the Pilot Drill

Straight Guide Sleeve - Without Cleat - 2.0 mm x 6.0 mm Guide Sleeve Inserts Thin-Walled Diagnostic Guide Sleeve -The Straight Cut thin walled Guide Sleeve is used for anterior areas where access to the implant area is unlimited. Sleeve is used to make a Guide for full edentulous implant cases. Dimensions: ID 2. 0 mm x OD 2. 4 mm x 6 mm L