EBC Racing 07-13 BMW M3 (E90/E92/E93) 4.0L Front Titanium Shim Chassis (Note: The Rugged Ridge Bumper

(Note: The Rugged Ridge Bumper Guard is required to install the Rugged Ridge Brush Guard)

Come with 3-1/2" 3 bolt flange and a 3" OD outlet

Built to OEM specifications to work with factory OEM flywheel or aftermarket flywheel built to OEM specifications

Features: Easy Plug & Play Installation Limits Up-Shifts Overdrive Disable Command Downshifts Decrease Gear Hunting NOTE: 01-02 models will require TCM Re-Flash to enable overdrive lock-out and proper function

EBC Racing 07-13 BMW M3 (E90/E92/E93) 4.0L Front Titanium Shim Chassis (Note: The Rugged Ridge BumperShims must be flat and sit without any gapping on the rear of the brake pad. If your pad set is supplied with any other shims such as the rubberised shims on most stock pads, these Must be removed before fitting titanium shims to avoid a pad over thickness situation. Simply prize the old shims off to break the adhesive seal with a blunt edge screwdriver or similar, and once removed lightly, sand the rear of the pad to remove any excess glue or surface